The unit type OS3050 or type OS3051 is universal applicable for automatic monitoring and control of reverse osmosis plants.
The controller is equipped with a conductivity meter optional is a second conductivity meter and temperature meter.
Also optional is a circuit board with two recorder outputs (0(4) - 20 mA).
There are five possible stages : "Stand by", "Production", "Rinse after production", "Rinse during standby" and "Maintenance".
Adaptable to user specific requirements by built-in programmable options. The programmed configuration will be stored into
non volatile memory and therefore not be affected by power loss.
| • |
Menu driven programming utilizing "two line" LCD-display. |
| • |
Choice of languages (English, French, German, Italian, Spanish or
Dutch). |
| • |
Adaptable to user specific requirements by built-in programmable
options. |
| • |
Simple control utilizing easy to follow symbols. |
| • |
Universally applicable for various sizes of installation. |
| • |
Desalinated water production controllable by hand or level switches. |
| • |
Control of the maintenance situation by means of a code choice possible. |
| • |
Programming a service telephone number possible. |
| • |
Substantial status information employing INFO key: actual input
and output conditions, service telephone number, software version,
programming situation of the annunciation and malfunction relays,
rinse interval, rinse times, instrument probe cell constants. |
| • |
Large green LED-display showing permeate- and raw water conductivity
plus the relative. |
| • |
Permeate-conductivity as a percentage value of the raw water conductivity
or raw water temperature. |
| • |
Optional card for 2 recorder outputs 0(4)-20mA (conductivity / temperature). |
| • |
Input: production-stop, storage tank full/empty, excess pressure,
low pressure, concentrate-monitoring or alarm reset, motor protection
switch, temperature feeler (optional). |
| • |
Integrated conductivity meter with automatic range switching. |
| • |
Conductivity range according to the instrument probe cell constants
from 0,1 to 1 00 000 µS/cm. |
| • |
The instrument probe cell constants programmable from 0,01 to 10,00
cm-1. |
| • |
Manual or automatic temperature compensation. |
| • |
Duplicate conductivity meter and temperature reading as an available
option. |
| • |
Thermo switch with annunciation contact for 115/230 Volt pressure
pump as available option Output: pressure pump (protection), input
valve, rinse valve for concentrate and permeate, annunciation and
malfunction contact. |
| • |
Security of program information against supply failure, as all program
information is stored without accu. |
| • |
Large capacity microprocessor with "Watchdog", illegal "Operation
code" and frequency monitoring. |
| • |
Manufactured in accordance with EMC codes of practice; by means
of galvanic isolation between the micro-processor and the in- and
output circuits, plus extra built-in filter. |
| • |
Available for wall-mounting and panel-mounting. |
| • |
Available (input /output) : 24/24V, 115/115V, 230/230V. |
