E.W.S. presents a new filter/softener water treatment controller: SFS8000

E.W.S. presents a new cooling tower water treatment controller: CTS8000

E.W.S. presents a new ultrafiltration water treatment controller: UFS8000

Water treatment products | E.W.S | water treatment controllers - accessoires - chemical testkits

Home » Controllers

News

Added the possibility for connecting paddle wheel flow meters to the rgs8000 reverse osmosis controller

Added : possibility for connecting paddle wheel flow meters -> rgs8000

User Interface
- Colour 7X TFT display (800×480)
- Control through touch panel
- Language : English, French, German, Dutch and Russian
Inputs
- 8x Input for potential free switch
- 1x Conductivity meter
- 1x Temperature meter
- Expandable with :
  - 3x Conductivity meter + 3x Temperature meter
  - 12x input 0 (4) -20mA
  - (Flow, pressure, conductivity, pH and tank level) or paddle wheel input (Flow)
Conductivity meter
- Automatic range switching
- Cell constants from 0,01 – 10,00 cm-1
- Range from 0,5 – 100.000 µS/cm depending on used cell
- Manual or automatic temperature compensation
- Capacitive cell
Temperature meter
- Range from 0 – 94°C (∆ 32 – 201 °F)
- PT1000
Outputs
- 4x Relay output (powered)
- 3x Relay output (dry contact)
- Optional circuit boards for:
  - 7x Additional relay outputs(4x powered / 3x dry contact)
  - 6x output 0 (4) -20mA(recorder, soft starter set point)

Memory
- Last twenty alarm messages will be stored
- Real time clock with "lifetime" battery
- Programming will be stored and not be affected by power loss
SD Card
- Software updates
- Programming (Save and Load)
- Data log, Process log and Alarm log
Communication (optional)
- RS485 (data log formats : CSV)
- RS232 (data log formats : CSV)
- Webserver
  - visualisation (schematic)
  - configuration
  - download log files on SD Card
- Email messages (alarm)
Enclosure
- Suitable for wall mounting, panel mounting and plate mounting
- IP65
Power supply
- 24 VAC input / (output = input or extern)
- 115 VAC input / (output = input or extern)
- 230 VAC input / (output = input or extern)
- *) 115 VAC input / 24 VAC output
- *) 230 VAC input / 24 VAC output
- *) 240 VAC input / 24 VAC output
- *) Expand options limited

Home » Controllers

News

Added two additional program functions to the rgs8000 reverse osmosis controllers

Added : 2 Additional program functions -> rgs8000

User Interface
- Colour 7X TFT display (800×480)
- Control through touch panel
- Language : English, French, German, Dutch and Russian
Inputs
- 8x Input for potential free switch
- 1x Conductivity meter
- 1x Temperature meter
- Expandable with :
  - 3x Conductivity meter + 3x Temperature meter
  - 12x input 0 (4) -20mA
  - (Flow, pressure, conductivity, pH and tank level) or paddle wheel input (Flow)
Conductivity meter
- Automatic range switching
- Cell constants from 0,01 – 10,00 cm-1
- Range from 0,5 – 100.000 µS/cm depending on used cell
- Manual or automatic temperature compensation
- Capacitive cell
Temperature meter
- Range from 0 – 94°C (∆ 32 – 201 °F)
- PT1000
Outputs
- 4x Relay output (powered)
- 3x Relay output (dry contact)
- Optional circuit boards for:
  - 7x Additional relay outputs(4x powered / 3x dry contact)
  - 6x output 0 (4) -20mA(recorder, soft starter set point)

Memory
- Last twenty alarm messages will be stored
- Real time clock with "lifetime" battery
- Programming will be stored and not be affected by power loss
SD Card
- Software updates
- Programming (Save and Load)
- Data log, Process log and Alarm log
Communication (optional)
- RS485 (data log formats : CSV)
- RS232 (data log formats : CSV)
- Webserver
  - visualisation (schematic)
  - configuration
  - download log files on SD Card
- Email messages (alarm)
Enclosure
- Suitable for wall mounting, panel mounting and plate mounting
- IP65
Power supply
- 24 VAC input / (output = input or extern)
- 115 VAC input / (output = input or extern)
- 230 VAC input / (output = input or extern)
- *) 115 VAC input / 24 VAC output
- *) 230 VAC input / 24 VAC output
- *) 240 VAC input / 24 VAC output
- *) Expand options limited

Home » Controllers

News

Added manual control for switching on/off installation and switching between permeate valves depending on level of backwash tank to the uf2050 controllers

Added : manual control for switching on/off installation, switching between permeate valves depending on level of backwash tank

User Interface
- Monochrome LCD display (16×2 characters)
- Control through six keys
- Six LEDs for process and alarm indication
- Language : English and German.
Inputs
- 4x Input for potential free switch
Outputs
- 6x Relay output (powered)
- 5x Relay output (dry contact)

Memory
- Programming will be stored and not be affected by power loss
Enclosure
- UF2050 : Suitable for wall mounting, IP65
- UF2051 : Suitable for panel mounting, IP42
Power supply
- 24 VAC input / 24 VAC output
- 115 VAC input / 115 VAC output
- 230 VAC input / 230 VAC output
- 115 VAC input / 24 VAC output
- 230 VAC input / 24 VAC output
- 240 VAC input / 24 VAC output

Home » Controllers

News

Added the Russian language to the rgs8000 reverse osmosis controllers, please read the article or open the pdf file

Added : Russian language -> rgs8000

User Interface
- Colour 7X TFT display (800×480)
- Control through touch panel
- Language : English, French, German, Dutch and Russian
Inputs
- 8x Input for potential free switch
- 1x Conductivity meter
- 1x Temperature meter
- Expandable with :
  - 3x Conductivity meter + 3x Temperature meter
  - 12x input 0 (4) -20mA
  - (Flow, pressure, conductivity, pH and tank level) or paddle wheel input (Flow)
Conductivity meter
- Automatic range switching
- Cell constants from 0,01 – 10,00 cm-1
- Range from 0,5 – 100.000 µS/cm depending on used cell
- Manual or automatic temperature compensation
- Capacitive cell
Temperature meter
- Range from 0 – 94°C (∆ 32 – 201 °F)
- PT1000
Outputs
- 4x Relay output (powered)
- 3x Relay output (dry contact)
- Optional circuit boards for:
  - 7x Additional relay outputs(4x powered / 3x dry contact)
  - 6x output 0 (4) -20mA(recorder, soft starter set point)

Memory
- Last twenty alarm messages will be stored
- Real time clock with "lifetime" battery
- Programming will be stored and not be affected by power loss
SD Card
- Software updates
- Programming (Save and Load)
- Data log, Process log and Alarm log
Communication (optional)
- RS485 (data log formats : CSV)
- RS232 (data log formats : CSV)
- Webserver
  - visualisation (schematic)
  - configuration
  - download log files on SD Card
- Email messages (alarm)
Enclosure
- Suitable for wall mounting, panel mounting and plate mounting
- IP65
Power supply
- 24 VAC input / (output = input or extern)
- 115 VAC input / (output = input or extern)
- 230 VAC input / (output = input or extern)
- *) 115 VAC input / 24 VAC output
- *) 230 VAC input / 24 VAC output
- *) 240 VAC input / 24 VAC output
- *) Expand options limited

Home » Controllers

News

Added a pH meter to the ufs8000 ultra filtration controllers, please read the article or open the pdf file

Added : pH meter

User Interface
- Colour 7X TFT display (800×480)
- Control through touch panel
- Language : English, French, German, Dutch and Russian
Inputs
- 8x Input for potential free switch
- Expandable with :
  - 16x Input for potential free switch
  - 12x input 0 (4) -20mA
  - (Flow, pressure, turbidity, temperature and tank level)
Outputs
- 8x Relay output (powered)
- 6x Relay output (dry contact)
- Optional circuit boards for:
  - • 6x output 0 (4) -20mA (recorder, soft starter setpoint)

Memory
- Last twenty alarm messages will be stored
- Real time clock with "lifetime" battery
- Programming will be stored and not be affected by power loss
SD Card
- Software updates
- Programming (Save and Load)
- Data log, Process log and Alarm log
Communication (optional)
- RS485 (data log formats : CSV)
- RS232 (data log formats : CSV)
- Webserver
  - visualisation (schematic)
  - configuration
  - download log files on SD Card
- Email messages (alarm)
Enclosure
- Suitable for wall mounting, panel mounting and plate mounting
- IP65
Power supply
- 24 VAC input / (output = input or extern)
- 115 VAC input / (output = input or extern)
- 230 VAC input / (output = input or extern)
- *) 115 VAC input / 24 VAC output
- *) 230 VAC input / 24 VAC output
- *) 240 VAC input / 24 VAC output
- *) Expand options limited

Home » Controllers

News

Added the possibility for “top/bottom” filtration to the ufs8000 ultra filtration controllers, please read the article or open the pdf file

Added : Possibility for “Top / bottom” filtration -> ufs8000

User Interface
- Colour 7X TFT display (800×480)
- Control through touch panel
- Language : English, French, German, Dutch and Russian
Inputs
- 8x Input for potential free switch
- Expandable with :
  - 16x Input for potential free switch
  - 12x input 0 (4) -20mA
  - (Flow, pressure, turbidity, temperature and tank level)
Outputs
- 8x Relay output (powered)
- 6x Relay output (dry contact)
- Optional circuit boards for:
  - • 6x output 0 (4) -20mA (recorder, soft starter setpoint)

Memory
- Last twenty alarm messages will be stored
- Real time clock with "lifetime" battery
- Programming will be stored and not be affected by power loss
SD Card
- Software updates
- Programming (Save and Load)
- Data log, Process log and Alarm log
Communication (optional)
- RS485 (data log formats : CSV)
- RS232 (data log formats : CSV)
- Webserver
  - visualisation (schematic)
  - configuration
  - download log files on SD Card
- Email messages (alarm)
Enclosure
- Suitable for wall mounting, panel mounting and plate mounting
- IP65
Power supply
- 24 VAC input / (output = input or extern)
- 115 VAC input / (output = input or extern)
- 230 VAC input / (output = input or extern)
- *) 115 VAC input / 24 VAC output
- *) 230 VAC input / 24 VAC output
- *) 240 VAC input / 24 VAC output
- *) Expand options limited

Home » Controllers

News

Added functions: Real time clock with battery backup, software updates through SD Card and LCD type changed to blue/white to the es2030sv filter/softener controllers, please read the article or open the pdf file

Added functions: Real time clock with battery backup. Software updates through SD Card. LCD type changed to blue/white.

User Interface
- Monochrome LCD display (16×2 characters)
- Control through seven keys
- Eight LEDs for process and alarm indication
- Acoustic signal for alarm
- Language : English, French, German, Dutch, Spanish and Italian
Inputs
- 1x Input for potential free switch
- Optional (circuit board IF2030):
  - 1x Additional input for potential free switch
Outputs
- 6x Relay output (powered)
- Optional (circuit board IF2030)
  - 2x Relay output (dry contact)

Memory
- Programming will be stored and not be affected by power loss
- Real time clock with battery back up
SD Card
- Software updates
Enclosure
- Suitable for wall mounting, panel mounting and plate mounting
- IP65
Power supply
- 24 VAC input / 24 VAC output
- 115 VAC input / 115 VAC output
- 230 VAC input / 230 VAC output
- 115 VAC input / 24 VAC output
- 230 VAC input / 24 VAC output

Home » Controllers

News

Added real time clock with battery backup, software updates through SD Card and LCD type changed to blue/white functions to the ES2030CV controllers

Real time clock with battery backup. Software updates through SD Card. LCD type changed to blue/white.

User Interface
- Monochrome LCD display (16×2 characters)
- Control through seven keys
- Eight LEDs for process and alarm indication
- Acoustic signal for alarm
- Language : English, French, German, Dutch, Spanish and Italian
Inputs
- 1x Input for potential free switch
- Optional (circuit board IF2030):
  - 1x Additional input for potential free switch
Outputs
- 5x Relay output (powered)
- Optional (circuit board IF2030)
  - 2x Relay output (dry contact)

Memory
- Programming will be stored and not be affected by power loss
- Real time clock with battery back up
SD Card
- Software updates
Enclosure
- Suitable for wall mounting, panel mounting and plate mounting
- IP65
Power supply
- 24 VAC input / (output = input or extern)
- 115 VAC input / (output = input or extern)
- 230 VAC input / (output = input or extern)
- *) 115 VAC input / 24 VAC output
- *) 230 VAC input / 24 VAC output
- *) 240 VAC input / 24 VAC output
- *) Expand options limited

Home » Controllers

News

Instruction manual available in French language for the UF2050 controllers, please download or open it in the description below

Instruction manual available in French language

User Interface
- Monochrome LCD display (16×2 characters)
- Control through six keys
- Six LEDs for process and alarm indication
- Language : English and German.
Inputs
- 4x Input for potential free switch
Outputs
- 6x Relay output (powered)
- 5x Relay output (dry contact)

Memory
- Programming will be stored and not be affected by power loss
Enclosure
- UF2050 : Suitable for wall mounting, IP65
- UF2051 : Suitable for panel mounting, IP42
Power supply
- 24 VAC input / 24 VAC output
- 115 VAC input / 115 VAC output
- 230 VAC input / 230 VAC output
- 115 VAC input / 24 VAC output
- 230 VAC input / 24 VAC output
- 240 VAC input / 24 VAC output

Home » Controllers

News

Instruction manual available in Russian language for the UFS8000 controllers, please download or open it in the description below

Added : Russian language

User Interface
- Colour 7X TFT display (800×480)
- Control through touch panel
- Language : English, French, German, Dutch and Russian
Inputs
- 8x Input for potential free switch
- Expandable with :
  - 16x Input for potential free switch
  - 12x input 0 (4) -20mA
  - (Flow, pressure, turbidity, temperature and tank level)
Outputs
- 8x Relay output (powered)
- 6x Relay output (dry contact)
- Optional circuit boards for:
  - • 6x output 0 (4) -20mA (recorder, soft starter setpoint)

Memory
- Last twenty alarm messages will be stored
- Real time clock with "lifetime" battery
- Programming will be stored and not be affected by power loss
SD Card
- Software updates
- Programming (Save and Load)
- Data log, Process log and Alarm log
Communication (optional)
- RS485 (data log formats : CSV)
- RS232 (data log formats : CSV)
- Webserver
  - visualisation (schematic)
  - configuration
  - download log files on SD Card
- Email messages (alarm)
Enclosure
- Suitable for wall mounting, panel mounting and plate mounting
- IP65
Power supply
- 24 VAC input / (output = input or extern)
- 115 VAC input / (output = input or extern)
- 230 VAC input / (output = input or extern)
- *) 115 VAC input / 24 VAC output
- *) 230 VAC input / 24 VAC output
- *) 240 VAC input / 24 VAC output
- *) Expand options limited