Conductivity controller CC3020
A conductivity controller with conductivity meter designed for full automatic monitoring of the conductivity and starting a regeneration through an external device
Description
The CC3020 conductivity controller designed for full automatic monitoring of the conductivity and eventually starting a regeneration through an external device. The controller is equipped with a conductivity meter and adaptable to user specific requirements by built-in programmable options. Two modes are available inside the controller. From this, a choice can be made as to which programme should be launched by the controller. The base values which are programmed into the controller can be changed at any time and the programmed configuration will be stored into a non volatile memory and therefore not be affected by power loss.
Features
- User operated programming using double row of illuminated LCD display
- Display text in English, French, German or Dutch
- Adaption to user specific requirements by means of options programmable on site
- 4 stages : Monitoring, Pre Flush, Regeneration wait, Regeneration, Flush, Flush alarm
- Extensive status report facility using information button
- 1 input : regeneration busy
- 2 powered relay outputs : Flush valve (fused 8A), Alarm (fused 8A)
- 1 relay output (dry contact): Regeneration start
- Secure from power failure as all data is stored long-term without battery
- Efficient micro controller with watchdog, illegal operation code and cycle monitoring
- Safeguarded from EMC by galvanic separation between microcontroller and in- and output circuits and also by additional interference suppression filter
- Available for wall mounting
- Available (input /output) : 12VDC/12VDC, 24VDC/24VDC, 24VAC/24VAC, 115VAC/115VAC, 230VAC/230VAC
Software
Not applicable
News
No news